Product Introduction

EPE isolation membrane is made of POE coated with EVA on both sides. Its structure is three-layer structure of E layer/POE film/E layer. The membrane can isolate the bus bar in the module, play an insulating role, and effectively prevent the short circuit of the bus bar in the module during use. Product characteristics: strong adhesion with EVA adhesive film, no wrinkle in the lamination, UV resistance, and breakdown resistance.

Structural composition of isolation membrane:

        Layer E: Photovoltaic grade EVA resin, combined with anti ultraviolet, anti-aging agent and other additives, is used to have better weather resistance. P layer: Photovoltaic diaphragm is selected to ensure excellent mechanical and electrical properties.

        The main model is BJ-E20.

Product technical parameters：

Lamination process：

4.1.Single-cavity lamination parameters

4.2.Double cavity lamination parameters

五,、Storage and use: 

1、Store in a cool and dry constant temperature room with temperature ≤ 30 ℃ and humidity ≤ 60%; The storage period of this product is six months; It is recommended to use it within three months,；

2,、Vacuum packaging, inner packaging 150-350 m/roll (except for special requirements),；

3,、The long-term stacking height of products is not easy to be too high, and it is better to store products below four layers to avoid bending and deformation caused by heavy pressure；

4,、Do not damp the product. It is recommended to use the plastic film after opening the package or cutting it within 48 hours,；

5、In order to avoid abnormal component lamination caused by static electricity, it is recommended to eliminate static electricity in the whole process of component production,。